This article applies for the IP Cameras models: XPY 530.
Here are the steps to setup your XPY-530 IP Camera:
Using the IP Camera Finder (Comes into the Resource CD):
1. Run the "IPCameraFinder.exe" that comes with the Resource CD.
2. Connect your IP Camera to your router on any LAN port.
3. Press the "Find" button at the end of the window.
4. Change the IP address with one IP address that is within the range of IP's pool that handles your router.
5. Keep settings of your "Subnet Mask".
6. Change the default gateway and place the router's IP address to be the new Default Gateway.
7. On HTTP port, keep the default port if you will use one IP Camera on the network. If you will use more than one, assign a different IP address and port to each one of the IP cameras. The ports must be within the following range 1025-65536 for DDNS function to work without problems. For example: the IP address for the IP Camera will be 192.168.0.126 and port 1025. Follow the picture below.
8. After all steps, click on "Apply" to save changes.
9. Open your main browser and type the new IP Address that you gave to the IP Camera, with the new port. You will see the IP Camera webpage as well with all his features.
9. Open your main browser and type the new IP Address that you gave to the IP Camera, with the new port. You will see the IP Camera webpage as well with all his features.
Using the GUI (Guest User Interface)
1. Connect your IP Camera to your PC on the LAN port. Remember that your LAN Card needs to be prompted as "Automatic" to get the IP Address automatically.
2. At the bottom of the IP Camera, you will find the default IP address, such as "192.168.X.X". Type this IP address in your browser to enter the web GUI of this IP Camera.
3. Go to “Setup”.
4. Go to the “Network” tab and then go to “Network”.
5. Change the IP address with one IP address that is within the range of IP's pool that handles your router.
6. Keep settings of your "Subnet Mask".
7. Change the default gateway and place the router's IP address to be the new Default Gateway.
8. On HTTP port, keep the default port if you will use one IP Camera on the networl If you will use more than one, assign a different IP address and port to each one of the IP cameras. The ports must be within the following range 1025-65536 for DDNS function to work without problems. For example: the IP address for the IP Camera will be 192.168.0.126 and port 1025.
9. Press “Apply” to save your changes.