Home > English > IP Cameras > XPY500 - Series > XPY 530 Series: Camera Presets

XPY 530 Series: Camera Presets

This article applies for the IP Cameras models: XPY 530.

How to use Presets on IP Camera from the website (Only for XPY530)

1. Open the website of the camera (IP or DDNS).

3. Click the PTZ Control option.

2. Find the buttons as follows (CALL and SET):

3. Put the camera angle you want and then choose any number from 1-8 Preset menu to program it. We chose the 1 as an example. Click "SET". If the camera turns to other positions, and we chose the number 1 in the Preset menu, we click on the "CALL" option; the camera will move to the position previously programmed. The same applies to the other 7 Presets if configured.