Home > English > IP Cameras > XPY500 - Series > XPY 500 Series: Wireless setup

XPY 500 Series: Wireless setup

NexxtLogo

This article applies for IP cameras models XPY-500, XPY-520

Here are the steps to setup the Wireless connection on the IP camera:

1. Open the browser and go to your camera IP address and the assigned port, for example: http://192.168.1.126:81

2. Select the browser type regarding the browser that you are using. For example: Use "ActiveX option" for Internet Explorer, QuickTime option for Safari / Chrome / Firefox, IPOD/IPAD User Interface for MAC Smart devices, and "No Pug-In Mode" for Android devices.

 

3. You will see the camera display, you need to click in the tool icon (camera configuration).
 

4.  On "Network Settings”, go to "Wifi settings”

5.  Press "Scan" to find the Wireless Network that you will use. Verify all credentials for the chosen network (SSID, password and security mode) and press "Refresh". This will reboot your IP camera. If you can`t find the wireless input the SSID and Password manually.

6. Verify the Wireless connection on your IP camera.