This article applies to the Universal Repeater Nebula 300.
NOTE: Your N Router is compatible with any Operating System for setup, it only requires an internet browser to access it. (IE, Mozilla, Firefox, Chrome, Safari, etc.).
Please try the following steps to change the LAN IP Address for your router.
1. Connect you Nexxt Router Nebula 300 to your computer with the Ethernet cable from the Ethernet port to the one of the following ports #1, #2, #3 in the Nebula 300. Is recommended port #1.
2. Open your default browser, type the IP address http://192.168.0.1 and press the keyboard "Enter" to access the main page of the router.
2. Open your default browser, type the IP address http://192.168.0.1 and press the keyboard "Enter" to access the main page of the router.
3. In the main page you will need the password. Please type in the password box “admin”.
4. Hit “Advanced” so you can access the configuration page of your router.
Open the following link to see the complete image: Click Here.
5. After selecting "Advanced" you will see in the left side of the page a list of options. Please select "LAN Setting" from the list
5. After selecting "Advanced" you will see in the left side of the page a list of options. Please select "LAN Setting" from the list
Open the following link to see the complete image: Click Here.
6. Here you will find two lines that you can edit, "IP Address: 192.168.0.1" and "Subnet Mask: 255.255.255.0"
6. Here you will find two lines that you can edit, "IP Address: 192.168.0.1" and "Subnet Mask: 255.255.255.0"
Open the following link to see the complete image: Click Here.
7. Proceed to change the IP Address you need in the fields. In our case we change from 192.168.0.1 to 192.168.0.10 Hit "OK" and the process will be complete.
7. Proceed to change the IP Address you need in the fields. In our case we change from 192.168.0.1 to 192.168.0.10 Hit "OK" and the process will be complete.
Open the following link to see the complete image: Click Here.
