Viking 300: DMZ Settings

This article only apply for the Viking 300.

OTE: Your N Router is compatible with any Operating System for setup, it only requires a internet browser to access it. ( IE, Mozilla, Firefox , Chrome, Safari, etc).

Please proceed with this steps to setup your Viking 300. 

- Take the RJ-45 Ethernet cable that came in the box with the Viking 300. Connect one end into the network port of your Viking 300 (LAN1, LAN2, LAN3), the other end to the Ethernet port in the PC or Laptop you are using to setup the router. 

Now, proceed to access the Viking 300 web configuration page. Open your default browser and type the IP Address this will allow you access to the LOGIN page.


When the page shows up, you will see the password box, type "admin" to gain access to the router configuration webpage.

You will be in the "Status Windows" select the "Advanced" tap. 

Select "DMZ Host" here you can disable the firewall on the router for one device for a special purpose services such as internet gaming or video conferencing.

- Click the little box to enable the DMZ Function.
DMZ Host IP: Here you will add the IP Address of the computer, console or any device you need to have the special purpose.
- Hit "Save"


Now your DMZ is configured in your router.