Xtender300

This article applies to the Universal Repeater Xtender 300. Note: Your Universal Repeater is compatible with any Operating System (O.S.), it only requires a web browser to access the configuration main page. (PE: IE, Mozilla, Chrome, Safari, etc.) NOTE: To be able to configure the Xtender300 in any way, you need to access the repeater’s web interface. To do so, you must set up a Static IP on your PC’s wireless network adapter. On the following steps we will explain how to do this, plea...

This article applies to the Universal Repeater Xtender 300. Note: Your Universal Repeater is compatible with any Operating System (O.S.), it only requires a web browser to access the configuration main page. (PE: IE, Mozilla, Chrome, Safari, etc.) In this article we explain how to change the LAN IP so you can access your Xtender without change your Ethernet card settings in the futures. 1. Enter to your Xtender 300 main page. Remember, you need to change the settings in your Ethernet ...

This article applies to the Universal Repeater Xtender 300. Note: Your Universal Repeater is compatible with any Operating System (O.S.), it only requires a web browser to access the configuration main page. (PE: IE, Mozilla, Chrome, Safari, etc.) NOTE: Proceed to do this only when there is a new firmware to upgrade. Or when the firmware has some kind of problem. Open your internet browser, and type, http://www.nexxtsolutions.com/us/ Go to “Components” visualize the tab “Connec...

This article applies to the Universal Repeater Xtender 300. Note: Your Universal Repeater is compatible with any Operating System (O.S.), it only requires a web browser to access the configuration main page. (PE: IE, Mozilla, Chrome, Safari, etc.) Proceed to access the main page of the Xtender 300. Open your browser and type http://192.168.0.1 Remember to set up your Ethernet adapter so you can access the configuration page. If don´t remember here is the link to help you: Xte...

This article apply for all computer with Windows O.S and Mac. Remember to connect the computer to the main modem or router, this is your ISP (Internet Services Provider) so you can know your IP address range. Windows 8, 8.1 and 10: 1. In your keyboard press the “Windows” key and the letter “R” at the same time, as shown in the image below: 2. Type “CMD” then press “OK” 3. In the new black window type the command “ipconfig” press the key “Enter” take ...

This article applies for router models Xtender 300 Repeater. NOTE: Your N Router is compatible with any Operating System for setup, it only requires a internet browser to access it. ( IE, Mozilla, Firefox , Chrome, Safari, etc). If you have the following issues: - Issues with the router. - Intermittent connectivity. - Firmware upgrade. - Firmware corrupted. - No Internet. Please try the following steps to "reset" your router properly. You can do a "Soft Reset" or a "Hard Reset" ...