Welcome, Guest Login

Support Center

NexxtGate150: Hardware Installation

Last Updated: Feb 05, 2016 09:46AM COT
This article applies for the AEOPLDR4U2 NexxtGate 150 Wireless-N Outdoors Access Point. 

The Nexxt Solutions NexxtGate 150 Hight Power Access Point has been redesigned to accommodate higher transmission speeds with expanded coverage for outdoor applications. Now speeds up to 150Mbps allow this access point to be easily integrated into current working network infrastructures without interruptions.

Here are the steps to setup the AEOPLDR4U2 Outdoor AP Hardware Installation:

1. Slide the bottom cover of the unit down to expose the ports.

In order to integrate your new wireless access point into your installation, start by plugging one end of an Ethernet cable to the PoE port of the supplied injector module, and the other end of the cable to the LAN/WAN/POE port on the access point.

3. Use a second Ethernet cable to make the connection between the LAN port of the PoE module and your computer.

4. Replace the cover by sliding it up until it clicks in place.

5. Power the device by plugging the included AC power adapter to DC jack on the PoE unit, and the other end into a standard wall outlet.


Contact Us

  • Email Us
  • Live Chat!
[email protected]
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found