Welcome, Guest Login

Support Center

XPY CCTV: Outside the Network using NoIP

Last Updated: Feb 16, 2016 04:59PM COT
 
This article applies for the CCTV Cameras XPY-8000 Series.
 
Here are the steps to use our DVR outside the network using No-IP:

1. First we have to create a dynamic DNS, a web address to access our DVR Xpy8000 , so we have entered to www.noip.com, to make an account to use for this example .

 
 
2. Select the option "Sign Up" to start the account registration .

3. Then we have to complete the field information , user name, email , password and hostname to create .
 
 
For this example we use the following information:
Username: xpy8000
Email: jc.........hotmail.
Password: admin1
Hostname: xpy8000.ddns.net


 
4. After completing the information required to continue pressed the "Free Sing Up" option, Will receive an activation email account where open the link you send us the page so that the account is created and confirmed.

5. Already confirmed the account can login now to confirm that is already created , for which we enter the page www.noip.com No- IP , and enter the username and password of the account you have created for our DDNS ; for example our user is ¨xpy8000¨ and password is "admin1" , as seen in the following screen.
 

 
6. Later the host we've created appears.
 

 
7. Now we have created DDNS account.
 
8. ​The next step is to know what IP we assign to our DVR Xpy8000, we must enter and check the range of IP addresses available.
 
For our example we will use the address 192.168.0.5 , which is outside the range of IP router that manages to not cause any problems with others devices. So, we assign the port who is 8080, this IP will be assigned to our DVR Xpy8000 .

9. Next step we must configure this address in your router in Port Range option additional forwading have to add the port to mobile devices for example is 101.
 

 
 
10. Now with the settings on your router , we entered our DVR Xpy8000 and go to NETWORK menu . For which give a right click with the mouse and input box where the user by default is admin and no password appears , then select the Login option, here will appear the screen where you have to enter parameters for the Network for the DVR Xpy8000

For this example we use:

HTTP Port: 8080
Cellphone Port: 101
IP: 192.168.0.5 (Out of DHCP POOL of the router)
Entrance: 192.168.0.1


Press "OK" to save the changes.

11.  Activate the DDNS option. 
We select our DDNS server , for example, is no-ip , where we create the account.
 
Username: xpy8000 (user account DDNS we created previously) .
Password: admin1 .


 
12. To view the DVR from the web browser must only enter the IP 192.168.0.5 and port 8080 , being inside our LAN. Subsequently the logon screen appears Web type . First need to install the ActiveX Codecs . This can be installed from the CD manually using the file, ActiveXSetup.

Contact Us

  • Post a Public Question
  • Email Us
  • Live Chat!
techsupport@nexxtsolutions.com
http://assets2.desk.com/
false
assistly
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete