Welcome, Guest Login

Support Center

Nebula 150: Port Forwarding

Last Updated: Feb 23, 2016 02:33PM COT
NexxtLogo
 
This article applies for the model listed below: Nebula 150 (ARN01154U1 & ARN01154U2).
 


 
NOTE: Your N Router is compatible with any Operating System for setup, it only requires a internet browser to access it. ( IE, Mozilla, Firefox , Chrome, Safari, etc).


Here are the steps to enable the port forwarding for our Nebula150 routers. P
lease check your router firmware to know the steps to setup your Virtual Server (known as Port Forwardding) and enable a TCP Server, FTP Server or another external IP Service (IP Cameras, Remote desktops, etc) here.


Port Forwarding for Vertical Firmware router models (ARN01154U1)

Port Forwarding for Horizontal Firmware router models (ARN01154U2)


 
 
 
 

Port Forwarding for Vertical Firmware Models (ARN01154U1​)
 

 
1. Create your internal server, make sure the LAN users can access these servers and known related service port. For example, Web server’s port is 80; FTP is 21; SMTP is 25 and POP3 is 110. One case is the Slingbox port that is 5001. For other services such as IP Cameras, the port was given by device and port can be modified on the device itself by customer.
 
2. Open your browser (IE,Mozilla,Firefox,etc) and enter the IP address of the router "192.168.0.1" by default. This will prompt you to type some credentials to access the router webpage. Use "admin" as user and password.
 
 
3. On your router’s web click “Virtual Server".

4. Select “Port Range Forwarding”
 
 
 
 4. Input the external service port on "Start port - End Port" given from the device or service. If the service use a port range, place your range limits here. If the service uses an unique port, place this port on both fields.
 
5. Input the IP address that the service adquires from the router IP range. For example, if your Web server’s IP address is 192.168.0.10 inside the router's network, please input it to be declared on your DHCP internal table with the assigned service port.
 
7. Select the communication protocol used by your internal host: TCP, UDP or both (Recommended).

8. Choose "Enable" to activate the port or "Delete" to deactivate the port forwarding.

9. Click “Apply” to save your settings.

 

 
 

Port Forwarding for Horizontal Firmware Models (ARN01154U2​)

 
1. Create your internal server, make sure the LAN users can access these servers and known related service port. For example, Web server’s port is 80; FTP is 21; SMTP is 25 and POP3 is 110. One case is the Slingbox port that is 5001. For other services such as IP Cameras, the port was given by device and port can be modified on the device itself by customer.
 
2. Open your browser (IE,Mozilla,Firefox,etc) and enter the IP address of the router "192.168.0.1" by default. This will prompt you to type some credentials to access the router webpage.
 

 
3. Use "admin" as password.
 
4. On the router's webpage, go to "Advanced settings" at the middle of the webpage.
 

5. On your router’s web click “Virtual Server” and select “Port Range Forwarding”. 
 
 
 
6. Input the external service port on "Start port - End Port" given from the device or service. If the service use a port range, place your range limits here. If the service uses an unique port, place this port on both fields.
 
7. Input the IP address that the service adquires from the router IP range. For example, if your Web server’s IP address is 192.168.0.10 inside the router's network, please input it to be declared on your DHCP internal table with the assigned service port.
 
8. Select the communication protocol used by your internal host: TCP, UDP or both (Recommended).

9. Choose "Enable" to activate the port or "Delete" to deactivate the port forwarding.

10. Click “OK” to save your settings.


 
NOTE: If those steps does not work, you can UPGRADE your router. Follow this link for more details about firmware upgrade: How to upgrade my router.

Contact Us

  • Email Us
  • Live Chat!
techsupport@nexxtsolutions.com
http://assets2.desk.com/
false
assistly
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete