Welcome, Guest Login

Support Center

Nebula 150: How to reset your router?

Last Updated: Feb 23, 2016 01:21PM COT
NexxtLogo
 
This article applies for the model listed below: Nebula 150 (ARN01154U1 & ARN01154U2).
 


 
NOTE: Your N Router is compatible with any Operating System for setup, it only requires a internet browser to access it. ( IE, Mozilla, Firefox , Chrome, Safari, etc).


If you have the following issues:

- Issues with the Router,
- Intermittent connectivity
- Firmware upgrade
- Firmware corrupted
- No Internet 


Please try the following steps to "reset" your router properly. You can do a "Soft Reset" or a "Hard Reset" as a last resort.


 
Steps for Soft Reset (ARN01154U1)

Steps for Soft Reset (
ARN01154U2)


Steps for Hard Reset (ARN01154U1 and ARN01154U2)
- LAST RESORT -


 

 
 

Steps for Soft Reset (Models ARN01154U1)
 
1. Connect your Nexxt router to your PC with an Ethernet cable on the LAN port (Yellow).
 
2. Connect your Nexxt router to your ISP modem with an Ethernet Cable on the WAN port (Blue).

3. Verify that your PC has created the Local Area network on Network Connections.

4. Verify that the Firewall and Antivirus system are disabled to avoid any problems or restrictions.
 
5. Once all connected,  open your browser (IE,Mozilla,Firefox,etc) and enter the IP address of the router "192.168.0.1" by default. This will prompt you to type some credentials to access the router webpage.

 
6. Use "admin" as user and password. 

7. On the menu, click on “System Tools”.

8.  Click on “Restore to Factory”. Then click on "Restore".
 

9. After you click on this button, your router will be rebooting, wait a few seconds and DO NOT TURN OFF THE ROUTER.

10. Repeat steps 4 and 5 to access the router.


 

Steps for Soft Reset (Models ARN01154U2)
 
1. Connect your Nexxt router to your PC with an Ethernet cable on the LAN port (Yellow).
 
2. Connect your Nexxt router to your ISP modem with an Ethernet Cable on the WAN port (Blue).

3. Verify that your PC has created the Local Area network on Network Connections.

4. Verify that the Firewall and Antivirus system are disabled to avoid any problems or restrictions.
 
5. Once all connected,  open your browser (IE,Mozilla,Firefox,etc) and enter the IP address of the router "192.168.0.1" by default. This will prompt you to type some credentials to access the router webpage.

 
6. Use "admin" as password. 

7. On the main screen, click on “Advanced Settings” in the middle of the webpage.

 
8. On the menu, click on “System Tools”.

9.  Click on “Restore to Factory Default”. Then click on "Restore to Factory Default".


10. After you click on this button, your router will be rebooting, wait a few seconds and DO NOT TURN OFF THE ROUTER.

11. Repeat steps 4 and 5 to access the router.


 

Steps for Hard Reset (ARN01154U1 and ARN01154U2)
 
1. With the router turned on, press the “reset” button at the back of the router for 30 seconds.

 

2.  Disconnect the router from the power outlet.

3.  Again press the “reset” button for 30 seconds.

4. Connect the router to the power outlet.

 
 
NOTE: If those steps does not work, you can UPGRADE your router. Follow this link for more details about firmware upgrade: How to upgrade my router.

Contact Us

  • Post a Public Question
  • Email Us
  • Live Chat!
techsupport@nexxtsolutions.com
http://assets1.desk.com/
false
assistly
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete